Jan. 18, 2007 - Update on progress...
Intake is out, 3 inch runners are being used from an e12 manny. We (myself and my partner in crime, Teddy Haaland Jr. Sr. Kickass III) are welding a steel box, and we will bolt it to the studs of the runners. The blower fits on top. We had a minor crisis with hood clearance, but hopefully tomorrow we get the box done and the mounting points established. After that, I put the car back together the original way, and weld up the exhaust. Then I try to pass emissions! WOOOO!
Pic-chuhs...
oneeyemonkeypie
Bottom of welded manny...in progress
oneeyemonkeypie
I know its not on, but it looks sexy...
oneeyemonkeypie
It didnt fit, so we bent the box down and now it clears the hood on about a 15degree angle.
oneeyemonkeypie
Again...
oneeyemonkeypie
Sexy...
|
