I just can't stop.
 
I did a boost bump, swapping the Dinan supplied 3.43" supercharger pulley with a Vortech 3.33" supercharger pulley, bringing boost up from ~7PSI to ~8.5PSI. Nice noticeable increase in power, for only $35.
 
To bring it all together and keep it healthy, I have NickG burning me a baseline chip (on its way now) that he'll use as the foundation for a couple more chip burns to dial it in. 
 
On top of that, I have an RMS 3.5" intake tube coming, and Nick's software is setup for a 3.5" HFM .
 
I'm going to do a base run with the current chip/pulley setup, and then swap chips/HFM to see what the initial gains are and take it from there.